When you put your own hard work into building a house you own it in a whole new way. Though it can be very tiring and seem like it is taking forever at some points it is worth it. The end result is a beautiful home that you made with your own hands.
Note: Landy Home Company stands as one of the most prolific builders of northeastern Thailand with a focus on establishing one thing above all: quality. Their dedication to setting industry standards has led to the creation of innumerable projects. Thanks to an evergreen commitment to improving the construction industry, their buildings stand apart from the competition with their sustainable and modern living space that helps in building value in the eyes of homeowners and professionals alike. Today, we will go over some of the most interesting projects that were conceptualized by Landy Home Company. Read more at https://www.landyhome.co.th/en/Knowledge/1624521831
There is one main thing that you have to think about, the supply of water throughout your house is really important. A good water supply and drainage is really important because you are going to make it round the house and make sure waste water gets taken away from the house. In this essay we will be telling you how to put in the water and drainage system in your new house step by step.
Installing your water and drainage system
Always write out and look at written plans beforehand. Consult your local building inspector or plumbing inspector. They can offer valuable advice and can point out trouble spots. Remember the plumbing inspector is your friend. He must inspect your work. So, plan your drainage system and ask your local building department for a plumbing permit. Then start your work.
Preparation of the site
Now that the plan is in place and permits have been purchased, we are ready to prep the site for water/sewer/power and the house. Cover all the necessary areas where your water main and sewer lines will be located. Dig trenches to hold the pipes, always following the mandatory required slope for proper drainage. Plan for other underground utilities and any obstacles you may run into in the installation process. This is the foundation of your culinary and bathroom career and it must be done right.
Installing your water supply system
Install the system that will supply your house with the water it needs. You want to be sure to use good quality materials throughout your home so you do not have to repair or replace anything because of something you would not notice while building. In the water supply system you will need a couple of things. You will need your main water line, a water meter to measure how much water is used, you will also need a simple shut-off valve in case of emergency. Connect the main water line to the public water system or well. Install the water meter to measure what is consumed, and add a shut-off valve for emergencies.
Installing your drainage system
Install the drain system at the same time as the water supply. The drain system includes the sewer lines, the drainpipes and for some places not hooked to the local sewage system, your new septic tank. You will need a licensed, experienced plumber to make sure your house is draining into the septics. Install properly sloping sewer lines and properly draining drain pipes. Put in cleanouts at the correct locations for maintenance and no hassle working on this system later.
Testing and Inspection
Now that you have your water and drain systems installed, you are going to want to test everything to make sure it all works. Pressure tests the water supply lines for leaks and proper water flow. Water flow tests the drain system to see how much wastewater the system can recuperate and that it was done right. Then, schedule your scheduled inspection of what the local building department requires before you do your next step.
Finalization and Backfilling
Once your water and drain systems have been approved by the building department, backfill the trenches gently tamping the soil around the pipes back in place. Install any required backflow prevention devices. Please, make sure that you document where your new underground utility lines are at. This is proof that you did the job right and there won’t be any accidents in the future. Make sure that if something happens to a water line for the house that it will not have to be expedited to keep this system flowing correctly.
Conclusion
Installing a water and drainage system in your new home is a fantastic resource and a perfect blueprint should be prepared for completing this type of home project accurately. The details include not only the necessary preparations required before beginning a project, but also evaluative tactics to be trustworthy to settle before spending time as well as money on such a project. It goes on to insist on the vital modes necessary to execute in order to accomplish a successful conclusion to the overall project. It also asserts the significance of a site plan before proceeding any further with the project to have a greater understanding of what is to be performed. More specifically, it includes a cut and sketch of the sewer and water lines.
